Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
Tighten the nuts.
8. Install the clamps.
Rear
Rear Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight ahead" position using a suitable holding device.
3. Loosen the nuts.
^
Clean and lubricate the nut(s) and rear toe link threads.
4. While holding the toe link spindle tie-rod, rotate the toe link adjuster.
5. NOTE: Make sure the toe settings are not disturbed while tightening the nuts.
