mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Vehicle Lifting|Description and Operation|Page 2673 > < Oil Change Reminder Lamp|Service and Repair|Page 2668
Page 1
background image

Vehicle Lifting: Description and Operation

JACKING

WARNING:
-

Do not run the engine when jacking the vehicle. The wheels contacting the ground could cause the vehicle to move.

-

Make sure to properly locate jack stands under the frame to prevent the vehicle from falling.

CAUTION:
-

Wheel chocks should be used to prevent the vehicle from rolling and falling off the jack.

-

Position the jack to avoid contact with the fuel tank.

Jacking Points

Jacking Points

1. The front jacking points are indicated by a cut-out in the frame, located behind the front tire and wheel.

2. CAUTION:  Do not use the differential housing as a lift point. Leaks or damage to the rear axle cover and adjoining differential housing

surface may occur if a floor jack or any lifting device is allowed to contact the cover at any point where the cover joins the housing.

The rear jacking points are indicated by a cut-out in the frame in front of the rear tire and wheel.

LIFTING

Vehicle Lifting|Description and Operation|Page 2673 > < Oil Change Reminder Lamp|Service and Repair|Page 2668