mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Driver Air Bag Module|Page 8055 > < Driver Air Bag Module
Page 2
background image

or replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.

The side impact sensors (if equipped) are located at or near the base of the B-pillars and C-pillars.

To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).

Disconnect the battery ground cable and wait at least one minute.

2. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, notes, and instructions in the supplemental

restraint system (SRS) deactivation/reactivation procedure.

NOTE:  Within the Supplemental Restraint System (SRS) Deactivation and Reactivation procedure the driver air bag module is removed and
restraint system diagnostic tools are attached at the appropriate locations.

Deactivate the supplemental restraint system (SRS).

INSTALLATION

WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the removal
procedure.

Driver Air Bag Module|Page 8055 > < Driver Air Bag Module