mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Driver Air Bag Module|Page 8062 > < Driver Air Bag Module|Page 8060
Page 1
background image

Air Bag: Service and Repair
Safety Canopy Module

Removal and Installation

SAFETY CANOPY MODULE

Special Tool(s)

SPECIAL TOOL(S)

REMOVAL

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of personal injury from an accidental deployment, always carry or place a live safety canopy module with the safety
canopy and tear seam pointed away from your body. Failure to do so can result in personal injury in the event of a safety canopy module
deployment.

-

After deployment, the surface of the safety canopy can contain deposits of sodium hydroxide, a product of the gas generant combustion
that is irritating to the skin. Wash your hands with soap and water afterwards.

-

Never probe the connector on the safety canopy module. Doing so can result in safety canopy deployment which can result in personal
injury.

-

Anytime the safety canopy has deployed, the headliner, and all A, B, and C pillar upper trim panels and attaching hardware must be
replaced along with any other damaged components and hardware. Failure to do so can result in personal injury in the event of a safety
canopy deployment.

-

Vehicles equipped with safety canopy modules require a specific headliner. When installing a new headliner on a vehicle equipped with
safety canopy modules, make sure a headliner for safety canopy modules is being used. The word "AIRBAG" will appear on the
headliner where it meets each B and C-pillar trim panel. Failure to do so can result in personal injury in the event of a safety canopy
module deployment.

-

Before installing a safety canopy module, inspect the roofline for any damage. If necessary, the sheet metal must be reworked to its
original condition and structural integrity. All damaged fasteners must be replaced and any foreign objects removed. Failure to do so
may result in personal injury in the event of a safety canopy deployment.

Driver Air Bag Module|Page 8062 > < Driver Air Bag Module|Page 8060