Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).
Disconnect the battery ground cable and wait at least one minute.
3. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Deactivate the supplement restraint system (SRS).
4. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the seat
removal and installation procedure.
Remove the driver seat.
5. Remove the components in the order indicated in the illustration and table.
Item 5: Seat Position Sensor Removal Note
1. NOTE: Make note of the wire harness routing for installation purposes.
Disconnect the seat position sensor electrical connector.
INSTALLATION
1. NOTE: Make sure the battery negative cable is still disconnected before continuing with the installation portion of this procedure.
