Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
High Pressure Sensor / Switch: Description and Operation
HIGH PRESSURE CUTOFF SWITCH
The high pressure cutoff switch is used to interrupt A/C compressor operation in the event of high system discharge pressures.
-
The high pressure cutoff switch is mounted on a Schrader valve-type fitting on the high pressure side of the compressor manifold and tube
assembly.
-
A valve depressor, located inside the threaded end of the high pressure cutoff switch, presses on the Schrader valve stem.
-
This allows the high pressure cutoff switch to monitor the A/C compressor discharge pressure.
-
When the A/C compressor discharge pressure rises, the switch contacts open, disengaging the A/C compressor. When the pressure drops, the
contacts close to allow operation of the A/C compressor.
-
It is not necessary to discharge the refrigerant system to remove the high pressure cutoff switch.
