Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
6. Position the LH C-pillar trim panel.
1
With the hook aligned to the sheet metal, position the top of the C-pillar trim panel to the sheet metal.
-
Make sure the safety belt shoulder height adjuster and the C-pillar trim panel sliding insert are at their most upward position of travel to aid
installation.
2
Align and slide down, engaging the front upper trim panel retainer.
-
The C-pillar trim panel sliding insert circular recess must align to the safety belt guide bolt.
3
Align and push in, engaging the front lower trim panel retainer.
7. Push in on the C-pillar trim panel, seating the retainers.
-
After the C-pillar trim panel is reinstalled, make sure the safety belt shoulder height adjuster button activation and the vertical movement of the
trim panel sliding insert is smooth.
All vehicles
8. From under the front RH seat, remove the restraint system diagnostic tool from the safety belt buckle pretensioner floor electrical connector.
