Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
17. Attach the restraint system diagnostic tool to the front RH seat safety belt buckle pretensioner floor electrical connector.
Vehicles with safety canopies
18. Remove the LH C-pillar trim panel.
1
Pull out and release the retaining clips.
2
Pull out and release the retainer.
3
Lower the door opening weatherstrip, slide the C-pillar trim panel up, releasing the retainers and remove the C-pillar trim panel.
19. Disconnect the LH safety canopy electrical connector.
20. Attach the restraint system diagnostic tool to the vehicle harness side of the LH safety canopy electrical connector.