Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
3. CAUTION: To prevent damage to the axle shaft oil seal, install the special tool before removing the inboard CV joint housing from the axle.
Install the special tool.
4. For the inboard CV joint, carry out the following:
1
Remove and discard the boot clamps.
2
Remove the inboard CV joint housing.
5. For the inboard CV joint, carry out the following:
1
Remove and discard the retainer circlip.
2
Slide the boot away from the CV joint.
6. Using a suitable Claw puller, remove the CV joint.