Mountaineer AWD V6-4.0L VIN K Flex Fuel (2003)
CAUTION: Do not damage the ball joint boot while installing the special tool.
Using the special tool, separate the upper ball joint from the wheel knuckle.
Item 27: Lower Arm Installation Note
1. Check and, if necessary, align the front end.
Item 24: Lower Arm-to-Frame Nut (forward mounting) Installation Note
1. Do not tighten until the installation procedure is complete and the weight of the vehicle is resting on the wheel and tire assemblies.
Item 21: Shock Absorber-to-Lower Arm Bolt Installation Note
1. Do not tighten until the installation procedure is complete and the weight of the vehicle is resting on the wheel and tire assemblies.
Item 16: Upper Arm Installation Note
1. Check and, if necessary, align the front end.
Item 13: Wheel Knuckle Installation Note
1. Check and, if necessary, align the front end.
