Mountaineer AWD V8-4.6L (2010)
Install the new head restraint guide sleeve with the large button and wide key on the LH side of the seat with the button facing the driver door. See
Figure 19.
NOTE:
LH large button head restraint guide sleeve shown, RH small button guide similar.
37. Install the new head restraint guide sleeve with the small button and thin key on the RH side of the seat with the button facing the driver door. See
Figure 19.
38. To install the new head restraint guide sleeves, slide the sleeves through the backrest trim cover and the foam pad Using a back and forth motion
while twisting, apply downward pressure until the sleeve is seated onto the new backrest frame as far as it will go. See Figure 20.
