Mountaineer AWD V8-4.6L (2010)
25. Remove the backrest trim cover from the backrest foam pad. See Figure 18.
1. Release the hook-and-loop strips and fold the backrest trim cover back to access the second row of hog rings.
2. Using a suitable cutting tool, remove and discard the second row of hog rings.
26. Separate and remove the foam pad from the backrest frame.
27. Remove the side air bag module from the backrest frame See Figure 19.
1. Remove the three side air bag wire harness pin-type retainers.
2. Remove the two side air bag module bolts.
