Mountaineer AWD V8-4.6L (2010)
Truck Bed Storage Compartment Hinge: Service and Repair
Pickup Bed Storage Compartment Hinge - Side Compartment
Pickup Bed Storage Compartment Hinge - Side Compartment
1. Remove the side compartment lid. For additional information, refer to Pickup Bed Storage Compartment Lid - Side Compartment See: Truck Bed
Storage Compartment Door / Cover/Service and Repair/Pickup Bed Storage Compartment Lid - Side Compartment.
2. NOTE: The side compartment hinge is installed prior to the storage compartment seal.
NOTE: The surface of the compartment lid must be thoroughly cleaned before installing the new hinge.
Remove the storage compartment hinge.
-
Remove the storage compartment seal.
-
Remove the storage compartment hinge.
-
Clean the lid surface of any residual seal material.
-
Scuff the seal surface area.
-
Apply adhesive promoter.
-
Apply pressure to the hinge surface with a roller and allow seal to cure before installation for one hour.
3. To install, reverse the removal procedure.
