Mountaineer AWD V8-4.6L (2010)
Brake Caliper: Service and Repair
Rear Disc Brake
Brake Caliper
Removal
WARNING: Do not use any fluid other than clean brake fluid meeting manufacturer's specification. Additionally, do not use brake fluid that
has been previously drained. Following these instructions will help prevent system contamination, brake component damage and the risk of
serious personal injury.
WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In
the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data
Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.
1. Remove the wheel and tire. For additional information, refer to Wheels and Tires.
2. Remove the brake flow bolt and position the brake hose aside.
-
Discard the 2 copper washers.
3. Remove the 2 brake caliper guide pin bolts and remove the brake caliper.
