Mountaineer AWD V8-4.6L (2010)
4. Remove the brake pads from the brake caliper.
Installation
1. Install the brake pads to the brake caliper.
2. Position the brake caliper and install the 2 guide pin brake caliper bolts.
-
Tighten to 32 Nm (24 lb-ft).
3. Using 2 new copper washers, position the brake hose and install the brake hose flow bolt.
-
Tighten to 35 Nm (26 lb-ft).
4. Bleed the brake caliper. For additional information, refer to Brakes and Traction Control, Component Bleeding.
5. Install the wheel and tire. For additional information, refer to Wheels and Tires.
-
Apply brakes several times to verify correct brake operation.