Mountaineer AWD V8-4.6L (2010)
Remove the 2 radiator support bracket-to-radiator support bolts.
-
To install, tighten to 15 Nm (133 lb-in).
20. Lift the radiator and A/C condenser assembly off the frame supports and move the assembly toward the front of the engine.
21. Remove the radiator top seal.
22. NOTE: Do not remove the A/C condenser seals.
NOTE: LH shown RH similar.
Deflect the A/C condenser seals and remove the 2 A/C condenser-to-radiator support bracket bolts.
-
To install, tighten to 12 Nm (106 lb-in).
23. Lift the A/C condenser off the supports and move the A/C condenser toward the front of the vehicle.
24. Remove the radiator and the radiator support brackets as an assembly.
-
Move the LH radiator support bracket past the ABS module before removing the radiator from the vehicle.