Mountaineer AWD V8-4.6L (2010)
6. If equipped with a block heater, attach the block heater wiring harness retainers to the LH oil pan bolts.
7. Position the oil drain splash shield and install the 2 bolts.
-
Tighten to 12 Nm (106 lb-in).
8. Attach the battery cable bracket to the engine front cover and install the nut.
-
Tighten to 10 Nm (89 lb-in).
9. Attach the PSP hose bracket and install the nut.
-
Tighten to 10 Nm (89 lb-in).