Mountaineer AWD V8-4.6L (2010)
4. NOTE: Lubricate the inner lip of the crankshaft rear seal with clean engine oil.
Using the 2 Crankshaft Rear Seal Installers, install the crankshaft rear seal.
5. Using the 2 Crankshaft Rear Seal Installers and the Crankshaft Rear Oil Slinger Installer, install the crankshaft rear oil slinger.
6. Install the oil pan. For additional information, refer to Oil Pan See: Engine Lubrication/Oil Pan/Service and Repair/Oil Pan.
7. Install the engine-to-transmission spacer plate.
8. Install the flexplate. For additional information, refer to Flexplate See: Transmission and Drivetrain/Flex Plate/Service and Repair/Removal and
Replacement.