Mountaineer AWD V8-4.6L (2010)
-
Measure the resistance between trailer battery charge relay pin 86, circuit CBP12 (GN/WH), BJB face side and the SJB C2280e-6, circuit CBP12
(GN/WH), harness side.
-
Is the resistance less than 5 ohms?
Yes
GO to AC12.
No
REPAIR circuit CBP12 (GN/WH) for an open. TEST the system for normal operation.
-------------------------------------------------
AC6 CHECK THE BATTERY CHARGE RELAY COIL GROUND CIRCUIT FOR AN OPEN
-
Ignition OFF.
-
Disconnect: Negative Battery Cable.
-
Measure the resistance between the trailer battery charge relay pin 85, circuit GD120 (BK/GN), BJB face side and ground.
-
Is the resistance less than 5 ohms?
Yes
GO to AC7.
No
REPAIR circuit GD120 (BK/GN) for an open. TEST the system for normal operation.
-------------------------------------------------
AC7 CHECK FOR VOLTAGE TO THE TRAILER BATTERY CHARGE RELAY