Mountaineer AWD V8-4.6L (2010)
4. Install the transmission fluid pan and transmission fluid pan gasket and loosely install the transmission fluid pan screws.
5. Tighten the transmission fluid pan screws in a crisscross sequence.
-
Tighten to 11 Nm (97 lb-in).
6. Install the transmission fluid pan drain plug.
-
Tighten to 26 Nm (19 lb-ft).
7. Fill the transmission. For additional information, refer to Transmission Fluid Drain and Refill See: Service and
Repair/Procedures/5R55S/Transmission Fluid Drain and Refill.
Transmission Filter - In Line
Transmission Filter - In Line
NOTE: Use the following guidelines for installing the transmission fluid in-line filter:
