Mountaineer AWD V8-4.6L (2010)
4. Install the Spring Lock Coupling Disconnect Tool and press it into the spring lock coupling.
5. Separate the spring lock coupling.
Connect - Type I
1. Inspect and clean both spring lock coupling ends.
2. NOTE: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.
NOTE: Lubricate the spring lock coupling with clean engine oil.
Align the fuel tube spring lock coupling and push together until a click is heard.
3. Pull on the spring lock coupling to make sure it is fully seated. Install the fuel tube safety clip on the male end.
4. Connect the battery ground cable. For additional information, refer to Battery.
Disconnect - Type II
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component.
Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
