Mountaineer AWD V8-4.6L (2010)
Fuel Level Sensor: Service and Repair
Fuel Level Sender
Fuel Level Sender
Removal
WARNING: Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component.
Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
1. Remove the Fuel Pump (FP). For additional information, refer to Fuel Pump See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Fuel Pump.
2. Remove the screw and the fuel level sender cover.
3. NOTE: Note the routing of the fuel level sender wire for installation.
Remove the heat shrink tube covering the fuel level sender wire electrical connector.
4. Disconnect the fuel level sender wire electrical connector.
5. NOTE: Note the routing of the fuel level sender ground wire for installation.