Mountaineer AWD V8-4.6L (2010)
Alternator: Service and Repair
Generator - 4.6L (2V)
Removal and Installation
1. Disconnect the battery. For additional information, refer to Battery.
2. Remove the Throttle Body (TB).
3. Rotate the Front End Accessory Drive (FEAD) belt tensioner clockwise and position the FEAD aside.
4. Remove the 3 harness locators from the generator bracket.
5. Remove the 4 bolts and the generator bracket.
-
To install, tighten to 10 Nm (89 lb-in).