Mountaineer AWD V8-4.6L (2010)
4. Remove and discard the transmission fluid filter.
5. Clean and inspect the transmission fluid pan and magnet.
Installation
1. NOTICE: Damage may occur to transmission fluid filter seals if they are not lubricated with transmission fluid.
NOTE: Make sure that the transmission fluid filter seals are correctly seated on the transmission fluid filter.
Lubricate the transmission fluid filter seals and install the transmission fluid filter.
-
Tighten to 10 Nm (89 lb-in).
2. Install the transmission fluid pan magnet in the transmission fluid pan.
3. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage. If not damaged, the transmission fluid pan gasket should be
reused.
Install the transmission fluid pan gasket on the transmission fluid pan.
