Mountaineer AWD V8-4.6L (2010)
9. Install the transfer case. For additional information, refer to Transfer Case.
All vehicles
10. Fill and check the transmission fluid. For additional information, refer to Transmission Fluid Level Check See: Service and
Repair/Procedures/6R80/Transmission Fluid Level Check.
Manual Control Lever Shaft and Seal
Manual Control Lever Shaft and Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the selector lever cable heat shield.
3. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
Move the locking tab up and disconnect the transmission selector lever cable end from the manual control lever.
1. Locking tab
2. Selector lever cable end