Mountaineer AWD V8-4.6L (2010)
3. With the selector lever in PARK, remove the selector lever cable from the selector lever.
4. Remove the selector lever cable from the selector lever housing.
5. Pull the selector lever cable and grommet through the floorpan.
Vehicles equipped with a 6R80 transmission
6. Remove the selector lever cable shield by prying on the selector lever shield closest to the boot, then sliding the shield away from the boot.
7. NOTICE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the
selector lever cable bracket.
Unlock the lock tab and disconnect the selector lever cable end from the manual control lever.