Mountaineer AWD V8-4.6L (2010)
Drive/Propeller Shaft: Removal and Replacement
Driveshaft - Front
Driveshaft - Front
Removal and Installation
NOTICE: Always disconnect the front driveshaft from the transfer case first. Otherwise, the weight of the driveshaft may pinch the boot
between the driveshaft and damage the Constant Velocity (CV) joint flange which may cause the boot to tear.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Index-mark the front driveshaft at both ends to maintain driveshaft balance.
