Mountaineer AWD V8-4.6L (2010)
Windshield Washer Pump: Service and Repair
Washer Pump
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Disconnect the windshield washer pump electrical connector.
3. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical
advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product
Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before washer pump removal.
Disconnect the windshield washer reservoir hoses.
4. NOTE: When servicing the windshield washer pump, be careful not to damage the windshield washer pump seal.
Remove the windshield washer pump.
5. NOTICE: Do not operate the windshield washer pump before filling the windshield washer reservoir. Failure to do so could result in
premature pump failure.
To install, reverse the removal procedure.
-
Fill the windshield washer reservoir with windshield washer fluid.