Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Body / Frame Mount Bushing: Service and Repair
Body Support - Number 1
BODY SUPPORT - NUMBER 1
Materials
Material
Removal and Installation
NOTE: Left side shown, right side similar.
Upper and Lower Insulator
1. Remove the door scuff plate.
2. Remove the A-pillar lower trim panel.
1. Remove the pin-type retainer.
2. Remove the A-pillar lower trim panel.
3. Position back the carpeting and remove the body insulator plug.
4. NOTE: This step may require holding the lower retainer with an appropriate tool.
