Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Sunroof / Moonroof Frame: Service and Repair
ROOF OPENING PANEL FRAME
Removal and Installation
NOTE: The roof opening panel frame is not separately serviced, it is serviced only with the roof opening panel assembly.
1. Remove the headliner.
2. Remove the screws and remove the upper console bracket.
3. Disconnect the roof opening panel motor electrical connector.
4. NOTE: RH shown LH similar.
Remove the rear mounting bracket screws and disconnect the rear drain hoses.
5. NOTE: LH shown RH similar.
Disconnect the front drain hoses from the roof opening panel frame.
