Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Brake Pedal Assy: Service and Repair
Brake Pedal and Bracket - Fixed, Automatic Transmission
Brake Pedal And Bracket - Fixed, Automatic Transmission
Removal and Installation
1. CAUTION: When the brake booster push rod is disconnected from the brake pedal, the brake pedal return spring will force the brake pedal up.
NOTE: When removing the stoplight switch, retain the bushing and hairpin clip. They will be required for installation.
Disconnect the brake booster push rod.
1. Remove the hairpin clip,
2. Separate the stoplight switch and the brake booster push rod from the brake pedal pin.
3. Remove the brake booster push rod bushing.
2. Remove the bulkhead sound insulator.