Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Brake Rotor/Disc: Service and Repair
Front
Brake Disc
Brake Disc
Removal
1. Remove the front disc brake caliper support bracket.
2. NOTE: Match-mark the brake disc and hub.
Remove the brake disc.
3. CAUTION: Use a hub-mount brake lathe if necessary to machine the brake disc. Measure the brake disc and resurface as necessary.
Install a new brake disc if beyond specification.
Installation
1. Position the brake disc to the wheel hub.
^
Use Metal Brake Parts Cleaner F6AZ-2C410-AB or equivalent to clean the brake disc.
^
Using match-marks, mount the brake disc on the hub.
^
Apply High Temperature Nickel Anti-Seize Lubricant F6A_Z-9IA94-AA or equivalent meeting Ford specification ESE-Ml2A4-A to the hub
mounting surface to prevent future corrosion.
2. Install the front disc brake caliper support bracket.
Brake Disc Shield
Brake Disc Shield
Removal
1. Remove the brake disc.
2. Remove the bolts and the brake disc shield.
Installation
1. Drill three 6.35 mm (1/4 in) holes in the wheel knuckle.