Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Install the brake master cylinder reservoir.
1. Lubricate the two grommets with High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-I9542-AB or equivalent DOT 3 fluid meeting
Ford specification ESA-M6C25-A, and insert the grommets in the brake master cylinder.
2. Press the brake master cylinder reservoir into the grommets until it snaps.
3. Connect the clutch hydraulic fluid tube to the brake master cylinder reservoir.
Vehicles equipped with manual transmission
2. Connect the brake master cylinder fluid level warning switch.
All vehicles
3. Fill the brake master cylinder reservoir with High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid
meeting Ford specification ESA-M6C25 -A.
4. Bleed the brake system.
5. Bleed the clutch hydraulic system.
