Mountaineer AWD V8-4.6L SOHC VIN W (2002)
1. Compress the parking brake cable clip and remove the LH parking brake rear cable and conduit.
2. Compress the parking brake cable clip and remove the RH parking brake rear cable and conduit.
5. Remove muffler exhaust heat shield.
1. Remove the nuts.
2. Remove the bolts.
6. Remove the RH parking brake rear cable and conduit bracket screw from the center support bracket.
7. Rotate the rear parking brake cable out of the parking brake cable and conduit retaining clip.
8. Release the parking brake rear cable and conduit from the rear disc brake caliper anchor plate.
9. Unclip the parking brake rear cable and conduit from the parking brake lever, then remove the parking brake rear cable and conduit.
10. To install, reverse the removal procedure.
