Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Parking Brake Shoe: Service and Repair
Parking Brake Shoes
Special Service Tool(s)
Special Tool(s)
Removal and Installation
1. NOTE: Verify that the parking brake control is fully released.
Relieve the tension on the parking brake system.
1. Pull the front parking brake cable and conduit.
2. Insert a 4 mm (5/32-inch) drill bit or equivalent retainer.
2. Remove the rear tire and wheel assembly.
3. Remove the rear brake disc.
4. Remove the brake shoe retracting spring.
