Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Cruise Control Servo: Service and Repair
REMOVAL
1. Remove the accelerator control splash shield.
2. Disconnect the speed control cable end from the throttle nail head by pushing upward.
3. Remove the speed control servo from the inner fender.
1
Disconnect the electrical connector.
2
Remove the speed control servo bracket mounting bolts.
4. Depress the locking tab and rotate the speed control cable cap to remove.
5. Disconnect the speed control core wire end from the speed control servo pulley and remove the speed control servo.
1
Gently push the retaining spring.
2
Disconnect the speed control cable slug from the speed control servo pulley.