Mountaineer AWD V8-4.6L SOHC VIN W (2002)
11. NOTE: There are several kinds of bolts used in fastening the valve cover. The bolts must be installed in their original locations.
Loosen the bolts and remove the valve cover.
12. CAUTION: Do not use metal scraper, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These tools cause
scratches and gouges, which make leak paths. Use a plastic scrapping tool to remove all traces of old sealant.
Clean and inspect the mating surface.
13. NOTE: If the valve cover is not secured within four minutes, the sealant must be removed and the sealing area cleaned with metal surface cleaner.
Failure to follow this procedure can cause future oil leakage.
Apply the silicone gasket and sealant in two places where the engine front cover meets the cylinder head.
