mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Without Auxiliary Climate Control|Page 10723 > < On-Vehicle Vacuum Leak Detection W/Refrigerant Service Center|Page 10720
Page 1
background image

Condenser HVAC: Service and Repair
Without Auxiliary Climate Control

REMOVAL

NOTE:

-

If a condenser core leak is suspected, the condenser core must be leak-tested before it is removed from the vehicle.

-

Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of
system contamination from a failed A/C compressor or damage to the suction accumulator.

1. Recover the refrigerant.
2. Remove the air cleaner housing.
3. Remove the upper radiator sight shield.

4. Remove the nut and disconnect the compressor manifold and tube assembly from the condenser core.

-

Discard the O-ring seal.

5. Remove the bolt.
6. Remove the radiator grille.

7. Remove the three pin type retainers.

Without Auxiliary Climate Control|Page 10723 > < On-Vehicle Vacuum Leak Detection W/Refrigerant Service Center|Page 10720