mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Alignment|Service and Repair > < Alignment|Specifications|Page 2529
Page 4
background image

Poor Returnability/Sticky Steering 

Poor returnability and sticky steering is used to describe the poor return of the steering wheel to center after a turn or the steering correction is
completed.

Drift/Pull 

Pull is a tugging sensation, felt by the hands on the steering wheel, that must be overcome to keep the vehicle going straight.
Drift describes what a vehicle with this condition does with hands off the steering wheel.
^

A vehicle-related drift/pull, on a flat road, will cause a consistent deviation from the straight-ahead path and require constant steering input in the
opposite direction to counteract the effect.

^

Drift/pull may be induced by conditions external to the vehicle (i.e., wind, road camber).

Poor Groove Feel  

Poor groove feel is characterized by little or no buildup of turning effort felt in the steering wheel as the wheel is rocked slowly left and right within
very small turns around center or straight-ahead (under 20 degrees of steering wheel turn). Efforts may be said to be " flat on center."
^

Under 20 degrees of turn, most of the turning effort that builds up comes from the mesh of gear teeth in the steering gear. In this range, the steering
wheel is not yet turned enough to feel the effort from the self-aligning forces at the road wheel or tire patch.

^

In the diagnosis of a readability problem, it is important to understand the difference between wander and poor groove feel.

Alignment|Service and Repair > < Alignment|Specifications|Page 2529