Mountaineer AWD V8-4.6L SOHC VIN W (2002)
7. Remove the nut and remove the front evaporative emissions canister.
INSTALLATION
1. To install, reverse the removal procedure.
^
Leak test the evaporative emissions system. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative Emission
System Leak Test
^
Carry out the evaporative emissions repair verification drive cycle. See: Testing and Inspection/Component Tests and General
Diagnostics/Evaporative Emission Repair Verification Drive Cycle
NOTE: Lubricate all O-ring seals with O-ring seal lubricant or equivalent.