Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Fuel Injector Wiring Harness: Service and Repair
REMOVAL
WARNING: DO NOT SMOKE OR CARRY LIGHTED TOBACCO OR OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR
ANY FUEL-RELATED COMPONENTS. HIGHLY FLAMMABLE MIXTURES ARE ALWAYS PRESENT AND MAY BE IGNITED.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
1. Disconnect the battery ground cable.
2. Remove the splash shield.
3. Remove the air cleaner outlet tube.
1
Loosen the clamps.
2
Disconnect the hoses.
3
Remove the outlet tube.
4. Disconnect the fuel charging wiring harness connections.
5. Remove the fuel charging wiring harness from the clips on the bulkhead.
6. Raise and support the vehicle.
