Mountaineer AWD V8-4.6L SOHC VIN W (2002)
4.
Warm the transmission fluid to at least 130° F (54° C) as indicated by the TFT.
NOTE
THE FOLLOWING ENGAGEMENTS MUST BE PERFORMED IN ORDER FOR THE ENGAGEMENT PRESSURES TO PROPERLY ADAPT
WITH THE NEW CALIBRATION.
5.
Perform five (5) engagements from Park to Reverse. Each engagement must be 5 seconds apart.
6.
Perform five (5) engagements from Drive to Reverse. Each engagement must be 5 seconds apart.
7.
Perform five (5) engagements from Reverse to Drive. Each engagement must be 5 seconds apart.
8.
Perform five (5) engagements from Neutral to Drive. Each engagement must be 5 seconds apart.
Obtain an Authorized Modifications Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of
modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized
Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
031407A
Verify Condition, If Present
1.7 Hrs.
Reprogram The PCM To
The Latest Level. Removal
Of PCM To Retrieve Tear
Tag Information And
Relearning Of
Transmission Adaptive
Strategy Included
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECAL
42
Disclaimer