mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

A/T - 5R55W 4th - 5th Upshift/Downshift Shudder|Page 6309 > < A/T - 5R55W Soft/Harsh 2nd - 3rd & 3rd - 4th Gear Shifts|Page 6303
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
A/T - 5R55W 4th - 5th Upshift/Downshift Shudder

Article No.
03-14-7

07/21/03

TRANSMISSION - 5R55W - SHUDDER DURING 5-4
AND 4-5 SHIFT - VEHICLES BUILT 11/13/00
THROUGH 2/14/02 EQUIPPED WITH 4.6L ENGINE

FORD:
2002 EXPLORER 

MERCURY: 
2002 MOUNTAINEER

ISSUE
Some vehicles equipped with a 4.6L engine and 5R55W automatic transmission with the vehicle build date between 11/13/00 and 2/14/02, may exhibit a
shudder during 4/5 upshift and/or 5/4 downshift.

ACTION
Follow normal diagnostic procedures and verify the condition. If the condition is valid, reprogram the Powertrain Control Module (PCM) to the latest
calibration level. If the condition is not corrected after reprogramming, continue with normal diagnostics to pinpoint the cause. Refer to the following
Service Procedure for details.

SERVICE PROCEDURE

If the vehicle is built between 11/13/00 and 2/14/02 and has the conditions listed and does not have the latest PCM calibration, (see chart) reprogram the
PCM. Prior to performing any service procedures, verify tear tag information. Vehicle built after 2/14/02 are not affected by this TSB.

1.

Follow the procedures found in the Powertrain Control/Emissions Diagnosis (PC/ED) Service Manual and reprogram the PCM to latest calibration
level.

2.

After reprogramming has been completed, the transmission adaptive strategy for pressure control on engagements must be updated.

3.

Install diagnostic equipment and monitor the Transmission Fluid Temperature (TFT).

A/T - 5R55W 4th - 5th Upshift/Downshift Shudder|Page 6309 > < A/T - 5R55W Soft/Harsh 2nd - 3rd & 3rd - 4th Gear Shifts|Page 6303