Mountaineer AWD V8-4.6L SOHC VIN W (2002)
5. Remove the three passenger air bag module nuts.
1. NOTE: This retainer could not be shown at this stage of disassembly.
Remove the nut.
-
Follow up between the instrument panel support flanges to locate the remaining passenger air bag module retaining stud and nut.
2. Remove the two nuts.
6. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment door.
Reaching one hand into the glove box opening, push out on the passenger air bag module, releasing the clips at the top of the trim cover and
remove the passenger air bag module from the instrument panel.
Installation
All vehicles
1. Before positioning the passenger air bag module to the instrument panel, make sure that the trim cover retaining clips are positioned correctly.
2. NOTE: The passenger air bag module has been removed for clarity of alignment.