Mountaineer AWD V8-4.6L SOHC VIN W (2002)
3. Position the LH C-pillar trim panel.
1. With the hook aligned to the sheet metal, position the top of the C-pillar trim panel to the sheet metal.
2. Align and slide down, engaging the front upper trim panel retainer.
3. Align and push in, engaging the front lower trim panel retainer.
4. Push in on the C-pillar trim panel, seating the retainers.
Vehicles built up to 03/2002
5. NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Install the LH side C-pillar trim panel.
-
Position the trim panel, sliding the upper retainer into the sheet metal opening.
-
Push in on the C-pillar trim panel at the bottom, seating the lower retaining tab.
