Mountaineer AWD V8-4.6L SOHC VIN W (2002)
4. Separate the safety belt shoulder height adjuster.
1
Using the special tool, remove the safety belt shoulder height adjuster bolt.
2
Rotate the top of the safety belt shoulder height adjuster down.
5. Remove the safety belt shoulder height adjuster.
1
Rotate the safety belt shoulder height adjuster releasing the tab.
2
Remove the safety belt shoulder height adjuster.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
Make sure to tighten all nuts and bolts to specification.
^
Make sure the safety belt webbing is not twisted prior to installation.
2. Check the active restraint system for correct operation.
Second Row
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
WARNING: ALL SAFETY BELT ASSEMBLIES INCLUDING RETRACTORS, BUCKLES, FRONT SEAT BELT BUCKLE SUPPORT
ASSEMBLIES (SLIDE BAR), SHOULDER BELT HEIGHT ADJUSTERS (IF SO EQUIPPED) CHILD SAFETY SEAT TETHER
ATTACHMENTS AND ATTACHING HARDWARE SHOULD BE INSPECTED AFTER ANY COLLISION. ALL BELT ASSEMBLIES
SHOULD BE REPLACED UNLESS A QUALIFIED TECHNICIAN FINDS THE ASSEMBLIES SHOW NO DAMAGE AND OPERATE
PROPERLY. BELT ASSEMBLIES NOT IN USE DURING A COLLISION SHOULD ALSO BE INSPECTED AND REPLACED IF EITHER
DAMAGE OR IMPROPER OPERATION IS NOTED.
