Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Draining
1. With the vehicle in PARK, position it on a hoist. Set the vehicle as close to level as possible.
2. Remove the drain plug (large plug) and allow the fluid to drain.
Refill
1. Install the fluid drain plug.
2. Hold the larger drain plug with a wrench and remove the small (center) fluid level indicating plug using a 3/16-inch Allen key.
3. Install the special tool into the pan.
Note: Prior to filling the special tool with clean transmission fluid, make sure that the canister is clean.