Mountaineer AWD V8-4.6L SOHC VIN W (2002)
6. Install the reverse servo. Tighten the screws in the sequence shown.
7. Install new O-ring seals on the solenoid body connector. Lubricate the O-ring seals with clean automatic transmission fluid.
8. CAUTION: Inspect the transmission case bore to make sure it is free of foreign material and not damaged. If it is damaged, transmission leak
may occur.
Install the solenoid body. Tighten the bolts in sequence shown.
9. CAUTION: Lubricate the fluid filter seals with clean automatic transmission fluid; or they may be damaged.
NOTE: Make sure that the fluid filter seals are correctly seated on the filter.
Lubricate the seals and install the transmission fluid filter.
