Mountaineer AWD V8-4.6L SOHC VIN W (2002)
6.
Note the indexing and flange depth of the current Pinion Bushing and remove it using the following tools (Figure 3):
^
205-376
^
205-371
^
205-374
7.
Install the new Pinion Bushing using the same rotational indexing and depth as the original bushing with the following tools (Figure 4):
^
204-187
^
205-369
^
205-485/6
8.
Using all new hardware, reinstall the axle, stabilizer bar, and the crossmember by reversing Steps 1 through 5. The stabilizer link bolts must be
