Mountaineer AWD V8-4.6L SOHC VIN W (2002)
Windshield Washer Hose: Service and Repair
WASHER HOSE REPAIR
1. Locate and verify the leaking washer hose.
2. Cut the hose cleanly and remove the damaged portion of the washer hose.
3. Install a windshield washer hose adapter between the cut ends of the hose.
4. NOTE: In difficult cases, clamping may be required.
Install a segment of 6.4 mm (0.25 in) i.d. black rubber hose or equivalent over the ends of the washer hose, and clamp both ends of the rubber
hose using spring clamps or equivalent.